16CFR 1303 - Ban of Lead Containing Paint (Storage Bag Lettering) 16CFR 1500 - Federal Hazardous Substances Act Regulations (Using safe plastic, vinyl, etc) 16CFR 1500.3 - Flammable Tests  ASTM F963-96a - Standard Consumer Safety Specification on Toy Safety (Sharp edges, weight limits, stress testing, etc)

A Comprehensive Range of Testing Services
Has Been Performed:

Specialized Services:

• Age grade evaluations

• Specification manual development

• Design evaluations

• Interpretation and applicability of regulation and standards

• Injury data research

• Child development and behavior research 

• Product line reviews

• Risk assessment services

• Failure analysis

• Playground audits

This product was not designed or manufactured as a “climb on structure toy” that you would see on a playground, park, or schoolyard.  Please advise your children, or the recipient of this toy, this very important information. 

Failure to obey or understand this very important legal disclaimer could result in bodily injuries.  Climbing on this product, using excessive weight or force on a structure could cause it to break, and will void the warranty.

Please Use This Product in a Safe Manner and You Will Have Years of Fun!

1.   This product has been tested and approved for use for kids between the ages of 4-12 years of age, and is not a “climb-on” construction toy.

2.   When using this product for the first time it is highly recommended an adult instruct the child or children on how to properly assemble and disassemble a structure. Start building from the bottom or ground up to complete your structure.  When you are ready to disassemble a structure, you MUST always begin by removing pieces from the top and work your way down to the bottom.  Please review the set up and take down instructions for more information.

3.   As an educational tool, it is suggested that parents or guardians work with, and teach the children who use this product on how to build safe structures and other creative forms. 

4.   It is very important that every time a tube is inserted into a sphere, the rotating end of the tube should be turned to secure (or semi-lock) the tube to the inside of the sphere.  This is accomplished by turning the rotating end of the tube ¼ of the way around (or 90 degrees) in either direction.  You should feel the “key” (located on the end of the tube) roll over the speed bumps located inside of the sphere.  Note: This is not a 100% secure lock, and therefore this product is marketed as a “do not climb construction / structure toy”.  If you do not feel the “key” roll over the speed bumps (located inside of the yellow sphere), try using another “key hole” on the sphere until you have achieved success.  If you still cannot feel the speed bump “semi lock” into the sphere please do not use that particular piece.  It may still be under warranty or have reached the end of its product lifecycle.   

5.   It is highly recommended that all structures be built on a flat or even surface at all times.

6.   This product is made of a high quality Polypropylene and ABS thermoplastic material.

7.   This product also includes an ultra violet (UV) stabilizer to help minimize color fading due to excessive and direct sunlight.  It is not recommended to leave this toy in direct sunlight over long periods of time. Doing so will shorten the life of the product, and possibly cause the plastic to become brittle and possibly break over an extended period of time.

8.   If this product is left in direct sunlight for extended periods of time, thermoplastics will absorb the heat.  This toy could become too hot to handle with bare hands.  Please be cautious.  Another example (to be cautious) would be if this product were stored in a car on a hot day for an extended period of time.  Try to avoid storing this product in places where heat can build up and be absorbed by the product to avoid injury.

9.   Never attempt to remove the screws from the yellow sphere(s), or the yellow rotating ends from the tubes.  This will permanently damage the product and will void the warranty. 

10. Toobeez were intentionally designed as a "non-climbable" structure / building toy.  It is primarily used for building framework. That is why the yellow ends may come apart from the tube if you stand on the product, or try to bend the yellow ends forcefully into a sphere. This is a built in safety feature, and is not advertised at all (it is our patent pending "company secret").  The yellow ends of the tubes are designed to be used only at certain angles when in use with the spheres.  If you try to force the tubes into a bad angle, this puts unwarranted stress on the sphere and on the yellow tube ends. Which in-turn will cause one of the following actions:

·     Pressure on the screws to become loose on the sphere (screws can be re-tightened with a #10 Torx screwdriver)  

·     Pressure on the "T" located on the yellow rotating ends may bend

·     The yellow rotating ends may come out of the tube (simply re-insert into the tube & be careful not to pinch your hand)

If any of these actions occur, we will conclude the product was "possibly" being used in an inconsistent manner in which it was designed for.

11.  If the screws ever come loose on the sphere, use a Torx #10 screwdriver to re-tighten.  Be careful not over tighten the screws. 

12.  Do not use this toy as a baseball, bat, sword, or any type of weapon.  Please play safely.

13.  Do not use this toy to harm other people, animals, or other personal property.

14. It is never recommended to use this product in a swimming pool or in any body of water. This product is not a safety flotation device.  The tubes on this product will absorb water and will cause it to sink.  Using this product in water is at your OWN RISK.